ICU/NICU Ceiling Pendant YR02086: Site Requirements and Installation Conditions 2026
The ICU/NICU Ceiling Pendant YR02086 is designed to enhance healthcare delivery in critical environments such as operating rooms and intensive care units. Understanding the site requirements and installation conditions is crucial for maximizing the efficacy and operational safety of this advanced equipment.
Technical Specifications of YR02086
| Technical Parameter | Specification |
|---|---|
| Model | YR02086 |
| Technical Parameters | HFP-DS240/380 double arm surgical pendant |
| Arm rotating radius | 1000 mm |
| Arm rotating angle | 340° |
| Length of the instrument column | 1 m |
| Braking system | Electromagnetic brake and damping brake |
| Maximum load capacity | 220 kg |
| Rails for attachments | Available |
| Valves for pneumatic instruments | 1 |
| Standard configuration | DIN standard |
| Electrical sockets | 12 |
| RJ45 network socket | 4 |
| Grounding terminal | 6 |
Environmental Conditions for Installation
To ensure the optimal performance of the YR02086 pendant, specific environmental conditions must be maintained. These include:
- Temperature Range: Ideal operating temperature is between 15°C to 30°C to ensure electronic components function correctly.
- Humidity Levels: Relative humidity should not exceed 70% to prevent corrosion and maintain electrical integrity.
- Ventilation: Proper ventilation is crucial to dissipate heat generated by the pendant, ensuring longevity and reliability.
- Vibration and Electromagnetic Interference: The installation site should be free from excessive vibrations and electromagnetic interference. These factors can disrupt the functional integrity of electronic components.
- Clearances: Adequate space around the pendant must be maintained to avoid obstructions and allow for maintenance and ease of access.
Preparation Checklist for Installation
Before installation, ensure the following conditions are met:
| Check Item | Description |
|---|---|
| Unboxing | Inspect the unit for any shipping damage and ensure all components are present. |
| Anchoring | The ceiling must be structurally sound to support the pendant's weight (220 kg maximum). |
| Leveling | Ensure the pendant is level to facilitate proper operation and aesthetic alignment. |
| Electrical Connection | Verify that the electrical system meets the specifications required for the pendant. |
| Calibrating | Run initial calibrations after installation to guarantee all functionalities operate as intended. |
Common Installation Mistakes to Avoid
When installing the YR02086 pendant, be wary of the following common pitfalls:
- Improper Weight Distribution: Ensure the weight is evenly distributed across all arms to avoid structural failure.
- Neglecting Electrical Standards: Failing to adhere to local electrical codes can result in safety hazards.
- Inadequate Space: Not allowing sufficient clearance can cause operational difficulties and hinder maintenance.
- Ignoring Manufacturer Guidelines: Always consult the user manual for specific installation instructions and requirements.
Frequently Asked Questions
What are the site requirements for the ICU/NICU Ceiling Pendant YR02086?
The site requirements include maintaining ideal temperature (15°C to 30°C), humidity levels below 70%, ensuring proper ventilation, and avoiding excessive vibrations and electromagnetic interference.
How do I ensure proper installation of the YR02086 ceiling pendant?
Proper installation can be achieved by following the unboxing checklist, anchoring the unit securely, leveling it, and ensuring all electrical connections are correct and compliant with local standards.
What are the maximum load capacity and weight specifications for the YR02086?
The maximum load capacity for the YR02086 is 220 kg, and it is essential to ensure the ceiling can support this weight without structural compromise.
What types of environments are suitable for the YR02086 installation?
The YR02086 is suitable for environments such as operating rooms, emergency rooms, and intensive care units where precise and reliable access to medical instrumentation is critical.
Can the YR02086 be customized with additional accessories?
Yes, various accessories can be added to the YR02086, including optional gas outlet adapters, different braking systems, and additional attachment rails to enhance its functionality.
What are common mistakes during the installation of the YR02086?
Common mistakes include improper weight distribution, neglecting electrical standards, inadequate space for operation, and ignoring manufacturer guidelines during installation.
How do I perform initial calibrations after installing the YR02086?
Initial calibrations can be performed by following the manufacturer's guidelines outlined in the user manual, ensuring all systems are functional and properly aligned.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.